Toll-Free: 1.800.743.3553  |  E-mail: info@vanaire.com
Vanaire | A division of Vanegas Enterprises, Inc.
Fume ScrubbersMist EliminatorsHoodsFansDuct SystemsControl PanelsAtmospheric EvaporatorsOdor ControlAir StrippersFiberglass Tanks

Air Pollution Control Equipment Preventative Maintenance Program

Vanaire Professional Technicians perform thorough on-site inspections with recommendations for maintenance and repairs to ensure that your air pollution control equipment or ventilation system is operating at peak performance. Following a comprehensive evaluation of each component including fans, scrubbers, mist eliminators, ducts and hoods, Vanaire will provide you with a detailed report indication each component’s condition and whether additional maintenance is required.

A Vanaire preventative maintenance program virtually eliminates the inconvenience and high costs of emergency downtime and repairs. Equipment condition reports enable you to schedule maintenance for minimal impact on production. A Vanaire maintenance program also enhances uptime and system life since all components are monitored and maintained for peak performance.

Scrubber Inspection & Maintenance
  • Inspect packing, mesh pads, mist eliminators and nozzles for obstructions and deterioration
  • Inspect recirculation pump for operation and wear
  • Inspect plumbing components for leaks
  • Clean mesh pads and pack as required
  • Repair all leaks and cracks
  • Verify fan performance
  • Inspect and grease bearings
  • Check fan belts for tension and wear
  • Check sheaves for alignment
  • Check fan shaft and fan wheel
  • Balance fan wheel if required
  • Check steel base for corrosion
System and Controls Inspection
  • Check draw at hoods
  • Check air flows
  • Inspects ducts, hoods and welds for integrity, leaks and cracks
  • Inspect differential pressure gauges and tubing
  • Inspect operation of solenoid valves
  • Inspect operation of pH, ORP and level control systems
  • Repair and adjustment controls
Fan Inspection and Maintenance
  • Inspect and grease bearings
  • Check fan belts for tension and wear
  • Check sheaves for alignment
  • Check integrity and balance of fan wheel and shaft
  • Check steel base for corrosion
  • Repair all leaks and cracks
  • Balance fan wheel if required
Site created by ThomasNet Web Solutions